Materials –  Stainless Steel

Dimensions – 8.8 x 8.8 x 17.3 cm

Weight – 275 gram

Screw Top Straw Slider Lid  / Dual Function lid

Capacity – 540ml

• Disassemble lid and hand wash all parts in soapy water, rinsing thoroughly before use.
• Dry completely before reassembling. Hand-wash only
• For best results, preheat by filling with boiling water, or pre-cool by filling with cold water or ice.
• Empty after 2 minutes and fill the tumbler.
• Fill at arm’s length to prevent accidental scalding.
• Check seals are in place and do not over fill to ensure lid can be placed on securely.
• Screw on lid with slider open (or straw in). Shut slider to close position when travelling to prevent spills.
• Disassemble components and clean thoroughly after each use.
• For a thorough clean use a straw brush.

CAUTION

• If filling with BOILING LIQUID, allow to cool with LID OPEN for at least 3 minutes before closing.
• Hot contents can create internal pressure. Keep slider open for liquid above 75°C. Open slider away from face.
• Remove Straw when using for Hot Liquids
• Keeps liquids very hot, allow to cool to drinking temperature before closing lid.
• Check temperature of contents prior to consuming
• Keep out of reach of children if contents are hot.
• Do not use for carbonated drinks or dry ice.
• Do not use in the microwave, oven or freezer.
• Do not overfill
• Juice, dairy or other liquids that spoil easily should not be kept in product for prolonged periods.
• Juice can ferment within a day, causing the lid to pop open, leading to injury or spills.
• Do not use abrasive cleaners containing bleach chlorine or other abrasives and harsh chemicals on any part of the cup
   
  TO REMOVE SLIDER FROM LID
  Move slider to open position
  Lift from front of slider
  Wash
  TO REASSEMBLE 
  Insert slider to open position
  Note: Slider cannot be removed or assembled in closed position

Find this product in store at the following retailers